|
|
|
Ceramic Fiber Board
|
Product Description:
Ceramic fiberboard is manufactured of a family of rigid ceramic fiber. Product offers low thermal
conductivity and low heat storage. Ceramic fiberboard provides height temperature
stability, excellent compressive strength, height insulation rate and machine
processed capability. It is easy to cut and unbreakable. Widely used in
application on the industry of petrochemical, metallurgy, power plant and than
expends to other relative industry.
|
Technical Characteristics:
- Excellent compressive strength and excellent toughness
- Excellent thermal stability and thermal shock resistance
- Excellent machine-processed capability
- Low thermal conductivity
- Low heat storage
- Excellent resisting wind capability
Application Range:
- The material of wall lines and back lines and the seal insulting material of
the expanded gap of furnace wall, Doors, etc.
- The material of wall lines and back lines of industrial furnace and the sealing and
insulting material of expand of furnace wall, furnace door furnace top lid, etc.
- Insulting material of high temperature, tubes.
- Excellent material to produce module
- Insulating backup to dense refractory
- Rigid high-temperature gaskets and seals
- Hot gas duct linings, low and high temperature dryers
- Industrial heat processing equipment
- High temperature baffles and muffles
- Industrial heat shields and thermal barriers
|
(GC21)
|
Typical Product Properties:
| Properties |
GC-21 |
GC-22 |
| Nominal Density(lb/ft/kg/m) |
12,14,16,18,22,26 |
| Temperature Grade(°F/°C) |
2300/1260 |
2556/1440 |
| Recommended Operating Temperature(°F/°C) |
2100/1145 |
2410/1319 |
| Compressive Strength(MPa) |
>0.5 |
>0.5 |
| Strength On Heating(%) 1100°Cx24H |
<-3 |
<-3 |
|
Typical Product Properties:
| Thickness |
1"(25mm) |
11/2"(38mm) |
2"(51mm) |
| Sheet Size |
610x610mm,610x914mm,610x1120mm |
| |
24"x24" |
24"x36" |
24"x48" |
|
|